Tag Archives: 28mm

Monday Music: 55 Days at Peking

One of my all time favourite movies is 55 Days at Peking, starring David Niven, Charlton Heston and Ava Gardner.

I am always looking for something else to waste my hobby spend on and did a little search on what was available for this period in 25/28mm. I have not looked at what is available in other scales but there sure seems to be a lot of 15-20mm stuff available if that is your preferred scale.

In no particular order:

Boxer Rebellion figures from Old Glory. They cover the Great Powers and there is even a set of civilian volunteers. The Boxers are covered quite well with a dozen or so sets including Chinese Regulars and Tartar Cavalry.

Boxer Rebellion by Redoubt Enterprises.   This range covers all the Great Powers, the Boxers and even the Relief Column that broke the siege.  The Redoubt catalogue has photos of pretty much all the figures in the range. The International Gun “Betsy” is one of my favourite pieces in this range.

Cellmate Miniatures have a Boxer Rebellion Range in 25mm.  I have never heard of these guys before.  Figures are pretty basic but cheap and there are plenty of photos. The web site includes a pdf ruleset for the Boxer Rebellion.

Irregular Miniatures has some Boxer Rebellion miniatures in their Colonial range. The Boxer infantry look quite nice.

Kennington Miniatures has early Chinese. I am not sure who owns these now but I think they are available from SHQ.

Matchlock Miniatures available from Caliver Books has a late 19th Century Colonial range. No pictures of models that I could see but a large range.

Ral Partha Boxer Range. The only place I could find these was at Great Endeavours in the UK. Plenty of pics of models too.

Studio Miniatures.  I cannot say anything about this range because my virus and firewall told me that the site was dangerous – it had a thing called Blackhole Exploit Kit lurking on the main site. Read about that here.

Oshiro Model Terrain has some really nice Boxer Rebellion Japanese. Worth a look.

Castaway Arts make some very very cool Chinese of the period. Definately worth a second look.

There are others but I have got bored looking. Short attention span strikes again.  If you know of others please leave details in the comments and I will update this post accordingly.

And if you want to watch the whole movie it is on YouTube.

boxer rebellion image

28mm Spanish Militia (Volontarios des Cuidad Rodrigo)

My latest unit and the first of my 28mm Spanish Napoleonic project. These figures are from Brigade Games.  The codes are Spanish Rebels I, Spanish Rebels II, Spanish Rebels III and Spanish Rebels Command 1. The Officer commanding is a single model code Spanish General.  I also brought Spanish Rebel Woman with Musket but did not include her in this unit. She will be painted separately as part of a guerrilla unit.  She bears more than a passing resemblance to “Teresa” from the Sharpe TV Series.  These models are fabulous. Nice detail, no flash worth mentioning and pretty easy to paint. I did not use any reference material for these guys so just painted them how I thought they should look. The Brigade Games range do not have a standard bearer so I converted a guerrilla who had a pistol in his left hand to instead be holding a flag.  The flag is one I found on the internet, re-sized and printed.

Image

The models are based on laser cut mdf bases from Australian company Back-2-Base-ix.

Image

Image

Image

Image

Image

Image

Some more Wild West buildings

Back in Wellington for the rest of the week. I have almost finished the first battalion of Spanish for my 1808-1812 Spanish Army – the Voluntarios de Cuidad Rodrigo. Just the basing to take care off and they will be done.  In the meantime, some pics of some of the early buildings I made for my Wild West town.

First off, the Freight Office. A couple of local farmers, Gunther Meyer and his neighbour  John-Boy Thomas, are loading their wagon. These figures are both Blue Moon from their Tombstone Civilians set (Available from Old Glory Code BMM-512)

Image

Here we see two of the town’s luminaries chatting on the street outside the Cattleman’s Exchange and Social Club.  Mr Hawkins the Bank Manager  (left) chats with A.W. Jones, Proprietor and Editor of the Trinity Pioneer. Mr Hawkins is a West Wind London Gentleman from the Gothic Horror/Jeckyll and Hyde series.

Image

Next door to the Cattelman’s is the Mining Claims office.

Image

Across the other side of town lives Old Ma Baker. She and her clan live in adjoining cottages.

Image

Ma Baker does not appreciate interlopers in her backyard. She is another from the Blue Moon Tombstone Civilian set.

Image

If anyone persists in arguing with her blunderbus, her three boys will rush to her defence. Shorty, Bobbie (Bucktooth) and Big Joe Baker are all Crusader figures. Molly the goat is a farm set toy and is always nervous.

Image

Finally, one of the local watering holes.  This was the first building I ever made and it shows – but I have a fondness for it none-the-less.

Image

And finally, finally. Some of my real Wild West critters.  Future freezer fillers.

04022013 Wild West 9

Wagons Ho!

I have no idea what the cost of a wagon was in terms of 19th century incomes, but when it comes to 28mm models they are bloody expensive items – especially when they are generally used as little more than a bit of cover for gunfighters in 28mm skirmish games.  I had brought a couple of the excellent wagons from the Blue Moon “Wagons Ho!” range (available from Old Glory). These were BMM1302 Covered Wagon and BMM1312B Flat Bed Supply Wagon with Spoked Wheels.  What can I say about the Blue Moon wagon range?  They are just fantastic. Beautiful little models and I am sure I will get a few more in due course.  The following photos are of those two models. I still have to do the reins and traces…another project.  The driver is from Knuckleduster. (Forrest Harris threw them in with another order I made – I am not sure if they are a separate code or not but you could always just ask him like I did)

Image

Image

Image

But as much as I liked these models, and even with the discount from Old Glory Army Card, I knew that making an entire wagon train would be pretty expensive.  So I began looking around for an alternative.  What I found was this.

Image

It is a cheap die-cast pencil sharpener. It had real possibilities. You can buy them in bulk for about US$2.50 a piece. I landed a dozen here in New Zealand for about $5 each in our money.  So, without further ado….

The canvas cover (which is molded brilliantly – even looks like canvas) just pops off. I removed the pencil sharpener from the guts of the wagon and then built up the sides and front with scrap pieces of balsa wood to make a driver’s seat and footrest.  I added a wooden tongue, hounds and the doubletree thingy that the horses harness will eventually be attached to. The rear of the wagon also got extended and a piece of cardboard covered the hole where you would have stuck the pencil in.

Image

A quick check that everything fit. The driver sits OK and the cover is still all good.

Image

Undercoated with black spray paint.  The cover was just drybrushed with some off white.

Image

The almost finished product – still have not done the reins and traces. Horses are spares available from Old Glory.

Image

The next one will be a bit more tarted up but I was pretty happy with this first attempt.

Image

The next project is this stage coach which is sitting on the workbench.

Image

Thanks for looking.  You can find a good range of pencil sharpener wagons here:

http://sharpenking.com/jk/coaches_pencil_sharpeners.htm

28mm Wild West China Town

I have an extensive collection of 28mm Wild West skirmish figures (about two hundred at last count) and have built quite a few buildings for my frontier town. This project started when I was making customised Event Cards for The Rules with No Name – my preferred rules of choice for Western gaming.

Image

I had already painted some Chinese Tong from the excellent Old Glory set XCW-06 Chinese Tong and figured they really needed some place to emerge from when their card was drawn.

The Chinatown was built from foam core, cardboard, balsa and some basswood. The lanterns were made from beads.

This aerial view shows the entire model.  I base my buildings on mdf bases and decided to make this one single terrain piece rather than individually based structures.  From the right you will find a restaurant and laundry, a dwelling, a brothel and Mr Wu’s gambling den and butcher shop at lower left.

Image

Facing the main street we have the Red Dragon Restaurant. Best noodle house east of the Rockies.

Image

Also facing Main St is Chow’s Chinese Laundry.

Image

Between Chows and the Red Dragon runs the muddy alley known locally as Chink’s Alley.Image

Mr Wu is the local provider of meat. As well as sheep and beef there is plenty of game available from his meat cooler.

Image

Of course, another service he provides is body disposal. No-one wants to become food for Wu’s pigs.

Image

The back door of Wu’s place.

Image

And finally some of the local Tong members, ready to fight at the order from their boss.

Image

28mm Conflix-style Medieval Houses

I am away from the Woolshed for nine days – down in Wellington for work. I have delved into the past to find an article I wrote that first appeared on the Kapiti Fusiliers website (now sadly defunct).  Anyways, without further ado…

Some time ago I brought a couple of pre-painted Conflix 25mm buildings. They are a little fantasy-ish for many people’s liking but I found them to be exactly what I wanted for my Bretonnian village. I wanted an entire village but thought the cost may have been a little prohibitive so decided that I could make something similar. Here are the results.

Image

I used high density insulation polystyrene for the body of the building. Six months ago I got a 2.4m x 0.6m sheet for NZ$30. Styrofoam is manufactured by Dow Chemicals (in Saudi Arabia) and is available just about everywhere. So far the sheet I brought has built a model Stonehenge, a 28mm Fantasy castle and now two houses and I still have three quarters of it left. For the roof and shingles I made do with card from old note books. Wood was balsa scraps (I never throw anything away and keep all those little pieces left over from basing my figures). For glue I used PVA and Selleys No-More-Nails. The only paint I brought especially for this project was a small test pot of a terracotta colour from the local hardware store for NZ$4.00.

Image

First thing I did was do a few sketches to get an idea of what I wanted to build. In this case I used the Conflix building as a guide for overall size and the angle of the gable. Then I cut the polystyrene into the basic house shape I had decided upon and glued together with No-More-Nails. I do not have a hot wire foam cutter so use a box cutter knife to fashion the styrene instead. You just have to be careful that you don’t pull the blade through the foam or it will pull and not cut cleanly. I used toothpicks to pin the pieces together and to provide support while the glue dried. I cut roof sections from card and glued them to the gable ends.

Image

Then I cut balsa into strips and glued it around the body of the house to form all exterior beams, door and window frames. Door handles were made by using small panel pins pushed into the styrene leaving the head exposed.

Image

Now the really boring bit. Cut 5mm strips from thin card – I used the backing off old note pads. Then snip them to make 5mm x 8mm tiles. You don’t have to be that accurate, just make sure that they are all about the same size. Starting at the bottom of the roof, glue a line of tiles down. Continue doing this up the roof until you reach the ridge. Do the same on the other side of the gable and you just need to glue some capping pieces along the ridge.

Image

I had tried to find some wire mesh of about the right size to use as lead light window panes but could not find anything around the house or for a reasonable price at the hardware store. So instead, I glued card into the window openings with the intention of just painting the lead lights later. At this stage the construction phase of the project was finished.

Image

Now it was time to add a bit of texturing. All I did was smear some Selley’s No-More-Gaps on the wall with my finger. Any excess that got on the timber beams can be trimmed off later before painting. For the chimney, I cut a small rectangular piece of foam about the size I wanted. Then I cut a notch for it to fit onto the roof and glued it in place with No-More-Nails. When it was dried I shaped i with craft knife and then etched the stone shapes in with a pencil.

Image

Now the building is finished it is time to paint. Although it is tempting to spray paint the model, unless you have an airbrush I would not recommend it as a way of applying the first coat. The solvents in the spray paint do a fine job of dissolving polystyrene. So, the best thing is to apply a coat of paint over all the exposed styrene first with a brush. After that you can happily spray coat the rest of the building. I used a can of black automotive spray undercoat.

Image

I wanted my building to look like the Conflix ones that I already had, so I painted and dry-brushed the walls grey, the timber beams using GW Vermin Brown and the tiles with a terracotta house paint to match. The results do not look too shabby.

Image

The finished product (right) standing alongside its Conflix counterparts.

28mm Connoisseur Saxon Garde du Corps

Apologies for the poor photos but I just cannot seem to get the lighting right. More experimentation needed. The yellow of the coats is a more yellow-buff colour in real lighting conditions and they are not quite so glossy.

I think that these and the Saxon Zastrow Cuirassier figures were the best of the Napoleonic sculpts that Peter Gilder did for his Connoisseur range.  These are still available from Andrew Barret at Bicorne Miniatures.  They have an animation that modern figures seem to lack. The detail is a bit more sketchy and you have to take the odd guess as to what exactly has been molded but all in all, I think they stand up pretty well for models designed in the 80s.

These are based on 40x50mm bases. I have decided to base all heavy cavalry on this size base, and for light cavalry the bases are 50x50mm.

Image

If the Connoisseur Range had one flaw it was the lack of trumpeters and standard bearer figures in the cavalry ranges. I understand that Peter Gilder consciously made the decision not to make them as a matter of economics. He would sell one or two of such figures for every dozen or so of the trooper models.  Bearing that in mind, the trumpeter and standard bearer are just trooper models converted. In the case of the trumpeter it is paint only and he must have dropped his trumpet.

Image

In an earlier post I said that I wouldn’t even attempt the monograms on the pistol holsters or saddle cloths. As a great philosopher once said A man has to know his limitations.

Image

The Zastrow Cuirassiers are next on the Heavy Cavalry to-do list. Just waiting on an order from Bircorne to arrive that includes a solitary Garde du Corps trooper who will become a trumpeter for the Zastrows.

Meanwhile, the re-basing of models painted over twenty years ago in the 80s continues. Next – A regiment of Hinchliffe and Foremost Dragoons.

Image

28mm Perry French Line Artillery.

Finally got these chaps finished. Brought so long ago the shop that sold them to me has been out of business for six months.  I had actually forgotten I had them until I unpacked a box of crap left untouched since we moved to the country three years ago.  It was a little like Christmas. Also found some Perry French Marshals and a pack of Senior Officers of various regiments lounging about  and a whole lot of woodland Indians I had got for a stalled War of 1812 project.  Hopefully not stalled for too much longer.

Anyways, I used to have my artillery mounted on 40mm wide bases but went with 50mm wide for this unit. I think it works a lot better.

Image

They are a mixture of sets FN17, 18 and 19.

Image

I like three to four gun batteries for Napoleonics. They look more like an artillery battery to me than a single gun model or perhaps two stuck on the table.  My next artillery project is a unit of French Guard Horse artillery.  I am going with Elite Miniatures guns (when I order them next week), Bircorne Minitaures crew and probably Hinchliffe Limbers because I have about thirty of them from a bulk lot I got about twenty years ago off a wargamer who was retiring from the hobby.

Image

Saxon Garde du Corps WIP

In the mid-80s I brought a unit of Connoisseur Miniatures 28mm Saxon Garde du Corps off Peter Gilder.  They sat unpainted in a box for nearly twenty years until I brought them some stable mates – a unit of Connoisseur Zastrow Cuirassiers from JT Miniatures who at that time owned the Connoisseur line.  Of course, they all sat mocking me until this past weekend. So the Garde du Corps got undercoated and ready to paint.

These Saxons will be part of my miniature 4th Cavalry Corps (1812), alongside regiments of Westphalian and Polish Cuirassiers.

One problem with the old Connoisseur line was the lack of standard bearers and musician models in the cavalry ranges.  I have converted a trooper to be a standard bearer (far left).

Image

I have almost no freehand ability so the monograms on the pistol holster covers and the saddle cloth wont be there.  I was reasonably happy with this model, given my level of ability.

Image

And a trumpeter who is partially completed.

Image

These models are quite chunky and full of mid-80s goodness – The horses are a bit small compared to the riders but I still like them.  Connoisseur miniatures are still available from Bicorne Miniatures in the UK.  I really love these old-style figures. As much as I like modern figures with their crisp mold lines and fine detail, I find they lack something in animation and personality. To me they are all much of a muchness.

Recently Eureka released a good line of Saxon heavy cavalry. They look really nice and I am tempted to get a unit to paint as the third Saxon Regiment that seems to get forgotten – the Leib Kürassiere Garde.  They have those fiddly monograms that I could never paint in a million years molded on the figure. That has to be good.
Image