Today’s Orcy Update is Big Dave. For my purposes he will be a Kings of War Krudger (an Orc Champion). I have had the figure for a long time (like maybe ten years but I honestly cannot remember) and only painted him in the last few days. He comes from the Frothers Unite-UK range of sometimes available figures. He is a great sculpt and I am glad I brought him, whenever that was. He is, at least according to the FU!UK ‘store’ still available from Frothers for £4 including postage anywhere in the world which is a pretty good bargain.
He has the traditional Orcy look favoured by sculptors since the cartoony look was popularised by (and I am guessing here) Games Workshop back in the 90s. However, he has a more gritty visage than the GW variants and I would have loved to see the sculptor who made him actually do a range of orcs.
He was a two part figure. The humongous axe and hands were a separate piece to the rest of the mini. As I am wont to do I drilled and pinned his hands before gluing together. He is armoured in an impressive boiler-suit of armour that, as far as I can see, has no way into or out of it. That may be why Big Dave scowls so much.
Just a note to show what I am planning on painting this week.
First off the old Marauder Giant from 1990. Since this was taken he has been disassembled, paint stripped, epoxied back together and undercoated. I got this guy in my job lot of second hand Orcs back in about 2004-ish.
Next is a Papo toy Orc Warrior re-purposed as an Orc Giant, or is that a Giant Orc – not sure which. I saw a couple of versions of this model online and was really impressed with how he came out. He was also about $NZ12.00 which is a cheap Giant by any measure. He was carrying a staff in his left hand. The other versions I saw of him converted this staff to another giant stone axe. I decided to give him an Orc standard instead. A few other Orcy bits have been glued on as well as a couple of shield as vambraces. He is mounted on a 50×50 base and is now undercoated as well and first dabs of paint are going on him today.
Depending on the rule set I use this is either a command stand or just three characters. I used a wooden coaster and made three slots to take 25x25mm bases.
The Orc General is the classic Grimgor figure. This one my son and I painted together when he was eight or so. It does hold a special place in my heart to be honest – probably more important to me than any other miniature I have ever painted or am likely to ever paint. In Kings of War he is classed as a Krudger (Infantry Hero). He has Crushing Strength(2) and is Inspiring. With five attacks hitting on 3+ he is no slouch either. Some magic armour and he is one tough cookie.
The Shaman is the Games Workshop 6th Edition Orc Shaman – or at least one of them. He has that Orcy look down pat. In Kings of War he is a Godspeaker. In the version of the KoW rules I have he can throw Fireballs (9) and has Inspiring and Godspeaker. In other versions he seems to lose Fireball and gets Bane-Chant (3) which allows him to try to augment fighting and wounding abilities of friendly units. I suppose I should get the official 2nd Ed Rule Book.
Lastly there is the GW Black Orc Standard Bearer. As I understand it this was a special figure included in the Orc Army Box released in 2000. I have no idea about the special rules for this guy but he was incredibly unbalanced – more of that below. In Kings of War he is a Flagger (an Army standard bearer). He only has one attack but is Inspiring which allows him to force re-rolls of failed nerve tests to friendly units within his inspiring range.
OK, so I had acquired this painted Grimgor Ironhide miniature way back in time. I had an unpainted Orc chariot. Now Grimgor has some wheels. I have a driver figure but there was no room for him. Was going to mount him standing on the yoke but it made it look cluttered – so an orcling is along for the ride instead. Grimgor needed a few touch ups to fix paint chips received after twelve years living in a box with other miniatures but other than that all I did was had the slotta base tab of the bottom to glue him into the chariot.
In Warhammer Fantasy Grimgor is a killer character figure. He had attacks out the wahzoo, magic items galore and came with a big unit of Black Orcs that made him one tough nut. So tough that when GW destroyed the Warhammer Fantasy milieu I think he was one of the only characters to survive or something. I guess they had a lot of un-sold Grimgor’s in metal and resin and didn’t want to melt them down. Who knows.
In Kings of War he has been relegated to a generic Orc krudger. Why Mantic decided to use that term I have no idea, other than perhaps Games Workshop had copyrighted “Boss” and “Orc” in the same sentence. “Chieftan” would have done it for me. But Krudger he is.
As far as game stats go he is no slouch in Kings of War either. Hits on 3s, is wounded on 5s and has seven attacks. His Crushing Strength (2) means he beats down most armour. Coupled with his Thunderous Charge (2), unless I am reading the rules wrong he gets +4 on his dice roll to wound (assuming he charges and said charge is unhindered). He can be upgraded with the usual KoW magic items and also take a Goblin Stabby Sneak (effectively a Goblin assassin who is ranged like a throwing weapon and has a 50/50 chance of returning to be used in subsequent turns) or a Goblin Zappy Sneak (a Goblin magician who obeys orders on anything but a 1 – if you roll a 1 he attacks you instead – who uses the Zap(2) special rule to potentially zap a few extra wounds onto your enemy).
Of course he also has the special rule Inspiring so he can force your opponent to re-roll a failed Nerve test for one of your units if the Krudger is within 6″.
I have always liked the GW Grimgor miniature and thought this was a good use for the second hand one I had. I do have another version that my son and I painted together back when he was about eight but he will be the subject of another post.
I painted these really quickly from scratch last week while I was at work (well not exactly while at work but while I was away for work). I decided not to go as far as doing tribal tattoos and so forth – just wanted the unit on the table. I could go back and do them at some stage if I wanted I guess. Figures are a mix of Games Workshop miniatures from about 4th to 6th edition as far as I am aware.
With the movement tray I wanted to stagger the position of the miniatures to give a more random look to a bunch of ranked figures. I did flirt with the idea of only using say six figures and making a single based “regiment”. But that would have entailed cutting the boars off their mounting slot thingies and frankly I couldn’t gather the enthusiasm. Kings of War has no issue with whether the full ten figures that make up a regiment are actually on the base as long as the minimum are there – in this case it would be six figures. The footprint of the base is what is important.
I have finished my first re-based Orc chariot regiment. These got some washes and a few dabs of paint and I replaced one crewman with an Orc archer for a bit of variety. Other than that just based on balsa bases and a movement tray to hold the lot of them. I have another chariot in pieces and one complete. Am looking for another one to make a second regiment (or Troop as the case may be).
I could not base them in close order with the scythes without making the bases a bit too deep so I removed them.
In Kings of War an Orc Chariot Troop of three is a fairly fast and hard hitting small unit but like most Orc units it is a pretty fragile one.
This is another batch of the old second hand figures re-based. The guy I brought these off used metal W40K Orcs and just attached fantasy heads and weapon arms. I did absolutely zero paint touch ups on these. I probably could have tarted them up a bit – the colours on the trousers and leather gear is plain with no shading or even washes – and in fact I still might on the easily visible bits. I also need to touch up a few visible paint chips here and there as well. I quite like how something as simple as re-basing can lift pretty average figures.
I am getting pretty close to running out of painted second hand figures – so will have to actually start painting Orcs pretty soon.
A long long time ago in a galaxy far away you used to be able to field Snotling armies in Warhammer. I never actually saw one but thought the idea was cute so started assembling a collection of Snotlings. Of course they sat boxed and in the case of the pump wagon, in pieces. I think I have one of the older Pump Wagons as well as another of the newer ones as well – I just couldn’t find them.
I have based these for Kings of War where they do duty as Orclings – a close relative of Snotlings but they branched off the orcish family tree when they cross-bred with an IP Lawyer.
First off a “regiment” sized unit – six 40mm square bases. All I did with these was black undercoat, a goblin green dry brush and some green ink – then picked out weapons and loin cloths. Didn’t bother with eyes or such.
The pictures were taken on the kitchen table because it was too damn cold to go over to the Woolshed with them. At least it wasn’t raining.
This “regiment” is based on a single base using an old GW Pump Wagon as a unit filler.
OK – I have been accused of being an internet troll. This time those detractors are right. Three Games Workshop Stone Trolls. These guy s were heavily chipped and required some touch up paint. Other than that I just slopped some washes on and redid the bases and made a movement tray for them. Happy with how these guys turned out.
Before and after (not exactly the same figure)
I am hoping that someone can tell me what manufacturer made this figure. He seems a bit different to my Warhammer Stone Trolls so I am assuming he is not a GW figure. The tab has been filed clean so there are no identifying marks.